Gigabyte R282-2O0 2U 24Bay DP C621A 2xS4189 24x2.5"-2x2.5"HS 1600W Server

R282-2O0 (rev. 100)
3rd Gen. Intel Xeon Scalable DP Server System - 2U 24-Bay Application: Networking
3rd Gen. Intel Xeon Scalable Processors
8-Channel RDIMM/LRDIMM DDR4 per processor, 32 x DIMMs
Supports Intel Optane Persistent Memory 200 series
Dual ROM Architecture supported
Intel C621A Express Chipset
2 x 1Gb/s LAN ports (Intel I350-AM2)
1 x Dedicated management port
24 x 2.5" SATA/SAS hot-swappable HDD/SSD bays
2 x 2.5" SATA/SAS hot-swappable HDD/SSD bays in rear side
Onboard 12Gb/s SAS expander
8 x PCIe Gen4 expansion slots
1 x OCP 3.0 Gen4 x16 mezzanine slot
1 x OCP 2.0 Gen3 x8 mezzanine slot
1600W (240V) 80 PLUS Platinum redundant power supply
Where Compute Reigns
3rd Gen Intel Xeon Scalable Processors Ice Lake
GIGABYTE servers and Intel Xeon Scalable Processors deliver incredible 1P/2P performance from edge to data center with incredible gains in I/O throughput and workload demands that need high performing CPUs with large, yet optimized, memory configurations.
Enhanced I/0: Support for PCIe 4.0 allows for double the throughput of PCIe 3.0 for fast and large data transfers. Also, 64 lanes per socket with up to 128 lanes in a 2P configuration for fast data transmission from CPU to GPU, accelerator or storage.
CPU Performance Boost: Now up to 40 cores per socket with greatly improved IPC on Intels 10nm architecture while operating CPUs at 105-270W. Also, an additional UPI lane is added for up to 11.2GT/s for a low latency interconnect between CPUs.
Next Gen Memory: Each processor provides eight memory channels to support 8 or 16 DIMM slots with up to DDR4-3200. There are two sub-clustering modes, Sub NUMA (SNC) and Hemisphere (HEMI), available using balanced memory that results in performance improvements. Additionally, support for Intel Optane PMem 200 series provides two modes for greater memory capacity and data persistence to process large amounts of data faster. Dimensions
2U
Motherboard
MR92-FS1
CPU
3rd Generation Intel Xeon Scalable Processors
Intel Xeon Platinum Processor, Intel Xeon Gold Processor, Intel Xeon Silver Processor
10nm technology, CPU TDP up to 270W
NOTE: If only 1 CPU is installed, some PCIe or memory functions might be unavailable
Socket
2 x LGA 4189
Socket P+
Chipset
Intel C621A Express Chipset
Memory
32 x DIMM slots
DDR4 memory supported only
8-channel memory architecture per processor
RDIMM modules up to 128GB supported
LRDIMM modules up to 128GB supported
3DS RDIMM/LRDIMM modules up to 256GB supported
1.2V modules: 3200/2933/2666 MHz
LAN
2 x 1Gb/s LAN ports ( Intel I350-AM2)
1 x 10/100/1000 management LAN
Video
Integrated in Aspeed AST2600
2D Video Graphic Adapter with PCIe bus interface
1920x1200 at 60Hz 32bpp, DDR4 SDRAM
Audio
N/A
Storage
Front side: 24 x 2.5" SATA/SAS hot-swappable HDD/SSD bays
Rear side: 2 x 2.5" SATA/SAS hot-swappable HDD/SSD bays ( Connected via SAS Expander)
SAS card is required for SAS devices support
Broadcom SAS35x36R expander
Bandwidth: SATA 6Gb/s or SAS 12Gb/s per port
Default configuration supports:
Non-supported SATA/SAS drives without SAS card
Suggested 12Gb/s SAS cards:
CRA4448
SAS
Supported by optional SAS Card
RAID
RAID Level depends on SAS Card
Peripheral Drives
N/A
Expansion Slots
Riser Card CRS2033:
- 1 x PCIe x16 slot (Gen4 x16), Full height half-length
- 2 x PCIe x8 slots (Gen4 x8), Full height half-length
Riser Card CRS2137:
- 1 x PCIe x16 slot (Gen4 x16 or x8), Full height half-length
- 1 x PCIe x8 slots (Gen4 x0 or x8), Full height half-length
- 1 x PCIe x16 slot (Gen3 x16 or x8), shared with OCP 2.0, Full height half-length
Riser Card CRS2027:
- 2 x PCIe x8 slots (Gen4 x8), Low profile half-length
1 x OCP 3.0 mezzanine slot with PCIe Gen4 x16 bandwidth from CPU_0
Supported NCSI function
1 x OCP 2.0 mezzanine slot with PCIe Gen3 x8 bandwidth from CPU_1
Supported NCSI function
Internal I/O
2 x CPU fan headers
1 x USB 3.0 header
1 x TPM header
1 x VROC connector
1 x Front panel header
1 x HDD back plane board header
1 x IPMB connector
1 x Clear CMOS jumper
1 x BIOS recovery jumper
Front I/O
2 x USB 3.0
1 x Power button with LED
1 x ID button with LED
1 x Reset button
1 x NMI button
1 x System status LED
1 x HDD activity LED
2 x LAN activity LEDs
Rear I/O
2 x USB 3.0
1 x VGA
2 x RJ45
1 x MLAN
1 x ID button with LED
Backplane I/O
Front side_CBP20O7NR: 24 x SATA/SAS ports
Rear side_CBP2022: 2 x SATA/SAS ports
Bandwidth: SATA 6Gb/s or SAS 12Gb/s per port
TPM
1 x TPM header with SPI interface
Optional TPM2.0 kit: CTM010
Power Supply

2 x 1600W redundant PSUs
80 PLUS Platinum
AC Input:
- 100-120V/ 12A, 50-60Hz
- 200-240V/ 10.0A, 50-60Hz
DC Input:
240Vdc, 10A
DC Output:
- Max 1000W/ 100-120V
+12V/ 81.5A
+12Vsb/ 2.5A
- Max 1600W at 200-240V or 240Vdc Input
+12V/ 133A
+12Vsb/ 2.5A